ENOVA XLR Female to XLR Male Microphone Cable
Enova’s exciting new XLR to XLR premade cables, come in a range of sizes from .5m to 10m and are built to last.
High-quality ENOVA XLR metal connectors are made with strain relief and a cable kink protection boot for a clean cable outlet.
These professionally assembled microphone cables with additional insulation over each conductor at the solder contact. The hand-made products are delivered with a 100% functionality check.
The cable is designed for symmetrical audio connections for analogue and digital AES / EBU signals suitable up to 200 m.
The cable diameter is 6.5 mm. The outer jacket is flexible and robust and black.
The conductor cross-section is 2 x 0.22 mm² (AWG 24 with 7x 0.20 mm strands) The conductors were produced with high-quality OFC (Oxygen Free Copper) copper cables.
The conductor insulation is made of FPE material and is marked in blue and red. Flexible PolyEster (FPE) is a high-tech material that combines various properties such as strength, flexibility and temperature resistance in one material.
The microphone cable is shielded by a spiral shield.
The ENOVA DMX cable is suitable as a flexible and mobile activity cable.
Cond. D.C.R. Ohm / 1km <80
Shield D.C.R Ohm / 1km <30
Nom cap (pF / m) between conductors 52
Working temperature minus 20 ° C to plus 60 ° C.
|Version (Plug / Chassis):||Cable Version|
|Connector type:||XLR, XLR female 3 pol, XLR male 3 pol|
|Cable type:||XLR female – male|
|Number of contacts:||3|
|Gender (M / F):||Kabel female auf male|
|Cable surface color:||Black|
|Cable length:||1 meters|
|Cable diameter:||Ø 6.5 mm|
|Wire size:||Ø 24 AWG 0.22 mm|
|Working temperature minimum:||-20°|
|Working temperature maximum:||+60°|
.5m, 1m, 3m, 5m, 10m